Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
MC10136 Datasheet(PDF) 5 Page - ON Semiconductor |
|
MC10136 Datasheet(HTML) 5 Page - ON Semiconductor |
5 / 8 page MC10136 3–31 MOTOROLA MECL Data DL122 — Rev 6 SWITCHING TIME TEST CIRCUIT AND WAVEFORMS @ 25 °C 50-ohm termination to ground lo- cated in each scope channel input. All input and output cables to the scope are equal lengths of 50-ohm coaxial cable. Wire length should be < 1/4 inch from TPin to input pin and TPout to output pin. Unused outputs are connected to a 50-ohm resistor to ground. NOTE: tsetup is the minimum time before the positive transition of the clock pulse (C) that information must be present at the input D or S. thold is the minimum time after the positive tran- sition of the clock pulse (C) that information must remain unchanged at the input D or S. INPUT PULSE T+ = T– = 2.0 ±0.2 NS (20 TO 80%) CARRY IN SET UP AND HOLD TIMES tset (L) tset (N) thold (L) thold (N) C Carry in CIN TPout tsetup L thold L 50% thold H tsetup H Q D or S 50% C 50% tC+Q+ tQ+ 80% 50% 20% Clock COAX COUT Q3 Q2 Q1 Q0 C D0 D1 D2 D3 S1 S2 tQ– tC+Q– VOUT CLOCK INPUT VIN Q Output COAX +0.31 V TPin +1.11 V +0.31 V +1.11 V 16 25 µF 1 0.1 µF 8 VEE = –3.2 VDC VCC1 = VCC2 = +2.0 VDC 0.1 µF |
Número de pieza similar - MC10136 |
|
Descripción similar - MC10136 |
|
|
Enlace URL |
Política de Privacidad |
ALLDATASHEET.ES |
¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |