GSM/GPRS Digital Baseband Processor

For Smartphone and Wireless Handheld Devices

Preliminary Technical Data

AD6528

Rev. PrA

This Information applies to a product under development. Its characteristics and specifications are subject to change without notice. Analog Devices

assumes no obligation regarding future manufacture unless otherwise agreed to in writing. No responsibility is assumed by Analog Devices for its use;

nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under

any patent or patent rights of Analog Devices.

FEATURES

Complete Single Chip Programmable Digital

Baseband Processor divided into three main

subsystems:

Control Processor Subsystem including:

32-bit MCU ARM7TDMI

On-chip System SRAM Memory

DSP Subsystem including

16-bit Fixed Point DSP Processor

Expanded Data and Program SRAM

Program Instruction Cache

Full Rate, Enhanced Full Rate and Half Rate

Speech Encoding/Decoding

DMA Subsystem including

16/32 channel chaining DMA

Peripheral Functions

Parallel and Serial Display Interface

Fast USB slave interface/ Fast IrDA

SPI slave/master

MMC/SD-Card support

Keypad Interface

FLASH Memory Interface

Pseudo SRAM support

13/26 MHz clock detection

1.8V and 3.0V, 64 kbps SIM Interface

Universal System Connector Interface

Baseband Converter Interface

Data Services Interface

Control of Radio Subsystem

Three independent programmable backlight outputs

Real Time Clock with Alarm

Programmable Power and Clock Management

Slow Clocking Scheme for Low Idle Mode Current

Power Down modes

On-chip support for GSM Data Services up to

14.4kbits/sec, Class 12 GPRS, HSCSD

JTAG Interface for Test and In-Circuit Emulation

1.8V Typical Operating Voltage

Operating Voltage Range 1.7V - 1.9V

Independent I/O and Memory Voltages

160-Ball LFBGA (mini-BGA) package

APPLICATIONS

GSM850/900/DCS1800/PCS1900 Smartphone and

Wireless PDA/Handheld Computers

GSM Phase 2 & GPRS Compliant

Full support for Java™, M-Services, and Multimedia

Messaging Services (MMS)

CONTROL

PROCESSOR

DSP

CHANNEL

EQUALIZER

SPEECH

CODEC

CHANNEL

CODEC

KEYPAD /

BACKLIGHT

INTERFACE

ACCESSORY

INTERFACE

RADIO

INTERFACE

SIM

INTERFACE

MEMORY

INTERFACE

UNIVERSAL

SYSTEM CONN.

INTERFACE

DATA

INTERFACE

TEST

INTERFACE

VOICEBAND /

BASEBAND

CODEC

INTERFACE

DISPLAY

INTERFACE

MCU

SYSTEM

SRAM

FIGURE 1. AD6528 FUNCTIONAL BLOCK DIAGRAM

GENERAL DESCRIPTION

The AD6528 is the third device in the Analog Devices

AD20msp430 series of SoftFone

The AD6528 is intended for use in feature-rich Smartphone and

Wireless PDA/handheld computer applications with

GSM/GPRS connectivity. It is designed to interface easily to an

application processor in such systems.

The AD6528 integrates full rate, enhanced full rate and half rate

speech codecs as well as a full range of data services including

circuit-switched 14.4kb/s, GPRS to Class 12, and HSCSD. In

addition, it supports A5/1 and A5/2 encryption algorithms as

well as operation in non-encrypted mode.

The highly programmable architecture and sophisticated internal

communication channels of the AD6528 offer maximum

flexibility to system designers. It can adapt to tighter

requirements led by changes in standards and multi-standard

handset implementation.

A complete data sheet is available under Non-Disclosure

Agreement to pre-qualified developers of GSM/GPRS terminal

equipment. Contact your local Analog Devices Sales Office.

ARM

SoftFone

of Sun Microsystems, Inc.