MCH3414 datasheet(4/4 Pages) SANYO | General-Purpose Switching Device Applications

4 page

MCH3414

No.8020-4/4

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co., Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of December, 2004. Specifications and information herein are subject

to change without notice.

Note on usage : Since the MCH3414 is a MOSFET product, please avoid using this device in the vicinity

of highly charged objects.

Número de Pieza	Descripción de Componentes	Html View	Fabricante
CPH3317	Ultrahigh-Speed Switching Applications	1 2 3 4	Sanyo Semicon Device
SSM6N7002FU	High Speed Switching Applications Analog Switch Applications	1 2 3 4 5	Toshiba Semiconductor
RN2970FE	Switching Inverter Circuit Interface Circuit and Driver Circuit Applications	1 2	Toshiba Semiconductor
MCH3319	Ultrahigh-Speed Switching Applications	1 2 3 4	Sanyo Semicon Device
NST489AMT1	High Current Surface Mount NPN Silicon Low VCE sat Switching Transistor for Load Management in Portable Applications	1 2 3 4	ON Semiconductor
SSM6K201FE	Power Management Switch Applications High Speed Switching Applications	1 2 3 4 5	Toshiba Semiconductor
2SK3453	Switching Regulator Applications	1 2 3 4 5 More	Toshiba Semiconductor
2SK3473	Switching Regulator Applications	1 2 3	Toshiba Semiconductor
CX86500	SCXV.92/V.34/V.32bis Modem / Controller-based Modem with Worldwide SmartDAA 3 Line Side Device for Embedded Applications	1 2 3 4 5 More	Conexant Systems, Inc
RC56LD	Integrated V.90/K56flex/V.34/V.32bis Modem Device Sets for Low Power Applications	1 2 3 4 5 More	Conexant Systems, Inc

Número de Pieza relacionado