Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
1--601966--0 Datasheet(PDF) 1 Page - TE Connectivity Ltd |
|
1--601966--0 Datasheet(HTML) 1 Page - TE Connectivity Ltd |
1 / 17 page Instruction Sheet Application Tooling for 408--7516 LOC B 1 of 17 E 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved TE logo is a trademark. *Trademark. Other product names, logos, or company names might be trademarks of their respective owners. TOOLING ASSISTANCE CENTER 1--800--722--1111 PRODUCT INFORMATION 1--800--522--6752 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.te.com 10 Mar 11 Rev E Screw- Machine Contacts PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended--use, production operations is available. Figure 1 AMP--TAPETRONIC* 4/8 Indent Stripper Terminator 599406--[ ] (Requires Funnel) Tooling for Loose-Piece Contacts 4/8--Indent Hand Crimping Tool (Typ, Requires Positioner or Turret Head) Tooling for Tape Mounted Contacts Extraction Tool (Typ) Insertion/Extraction Tool (Typ) 1. INTRODUCTION This instruction sheet covers tooling selections for crimping, inserting, and extracting screw--machine contacts, and manual application procedures. Application procedures for the other tools are packaged with the tool. Read these instructions thoroughly before making any selections. Dimensions in this instruction sheet are in millimeters [with inches in brackets]. Figures and illustrations are for reference only and are not drawn to scale. Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY. 2. DESCRIPTION The screw--machine contacts are supplied in loose--piece for manual (4/8--indent hand crimping tools) application and tape mounted for power assisted (machine) application. Insertion and extraction tools are used to insert contacts into and extract contacts from connectors. See Figure 1. The military uses a standardized numbering system which pertains to the tools that are qualified to military specifications (spec). Refer to Figure 2 for a cross--reference of these tools. Description Part Number Military Spec 4/8 I d H d 601966--1 MIL--C--22520/2--01 4/8--Indent Hand Crimping Tool 601967--1 MIL--C--22520/1--01 Crimping Tool 608651--1 ------ 601966--2 MIL--C--22520/2--02 601966--4 MIL--C--22520/2--06 P i i 601966--5 MIL--C--22520/2--08 Positioner or Turret Head 601966--6 MIL--C--22520/2--09 Turret Head 601966--8 MIL--C--22520/2--23 601967--2 MIL--C--22520/1--02 1--601967--2 MIL--C--22520/1--11 91066--1 MIL--I--81969/1--01 or MS3156--22 Insertion/Extraction 91067--1 MIL--I--81969/1--04 Insertion/Extraction Tool 91067--2 MIL--I--81969/1--02 or MS3156--20 91066--3 MIL--I--81969/1--03 or MS3156--16 445147--1 MIL--C--81969/28--02 Extraction Tool 58284--1 MIL--C--81969/28--03 Extraction Tool 91074--1 MIL--C--81969/28--01 or MS3178--001 Figure 2 Refer to Figure 3 for proper contact and tooling combination. Read the chart from the left page across to the right page. NOTE i |
Número de pieza similar - 1--601966--0 |
|
Descripción similar - 1--601966--0 |
|
|
Enlace URL |
Política de Privacidad |
ALLDATASHEET.ES |
¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |