Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
LM311-MIL Datasheet(PDF) 5 Page - Texas Instruments |
|
|
LM311-MIL Datasheet(HTML) 5 Page - Texas Instruments |
5 / 25 page 5 LM311-MIL www.ti.com SLCS163 – JUNE 2017 Product Folder Links: LM311-MIL Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated (1) Unless otherwise noted, all characteristics are measured with BALANCE and BAL/STRB open and EMIT OUT grounded. Full range for LM111 is –55°C to 125°C, for LM211 is –40°C to 85°C, for LM211Q is –40°C to 125°C, and for LM311-MIL is 0°C to 70°C. (2) All typical values are at TA = 25°C. (3) The offset voltages and offset currents given are the maximum values required to drive the collector output up to 14 V or down to 1 V with a pullup resistor of 7.5 kΩ to VCC+. These parameters actually define an error band and take into account the worst-case effects of voltage gain and input impedance. (4) The strobe must not be shorted to ground; it must be current driven at –3 mA to –5 mA (see Figure 18 and Figure 31). 6.5 Electrical Characteristics at specified free-air temperature, VCC± = ±15 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA (1) MIN TYP(2) MAX UNIT VIO Input offset voltage See(3) 25°C 2 7.5 mV Full range 10 IIO Input offset current See(3) 25°C 6 50 nA Full range 70 IIB Input bias current 1 V ≤ VO ≤ 14 V 25°C 100 250 nA Full range 300 IIL(S) Low-level strobe current(4) V(strobe) = 0.3 V, VID ≤ –10 mV 25°C –3 mA VICR Common-mode input-voltage range(3) Lower range Full range –14.7 –14.5 V Upper range 13 13.8 AVD Large-signal differential-voltage amplification 5 V ≤ VO ≤ 35 V, RL = 1 kΩ 25°C 40 200 V/mV IOH High-level (collector) output leakage current I(strobe) = –3 mA, VID = 5 mV VOH = 35 V 25°C nA Full range μA VID = 5 mV, VOH = 35 V 25°C 0.2 50 nA VOL Low-level (collector-to-emitter) output voltage IOL = 50 mA VID = –5 mV 25°C V VID = –10 mV 25°C 0.75 1.5 VCC+ = 4.5 V, VCC– = 0 V, IOL = 8 mA VID = –6 mV Full range VID = –10 mV Full range 0.23 0.4 ICC+ Supply current from VCC+ output low VID = –10 mV, No load 25°C 5.1 7.5 mA ICC– Supply current from VCC– output high VID = 10 mV, No load 25°C –4.1 –5 mA (1) The response time specified is for a 100-mV input step with 5-mV overdrive and is the interval between the input step function and the instant when the output crosses 1.4 V. (2) The package thermal impedance is calculated in accordance with MIL-STD-883. 6.6 Switching Characteristics VCC± = ±15 V, TA = 25°C PARAMETER TEST CONDITIONS LM311-MIL UNIT TYP Response time, low-to-high-level outputSee(1) RC = 500 Ω to 5 V, CL = 5 pF, see (2) 115 ns Response time, high-to-low-level outputSee(1) 165 ns |
Número de pieza similar - LM311-MIL |
|
Descripción similar - LM311-MIL |
|
|
Enlace URL |
Política de Privacidad |
ALLDATASHEET.ES |
¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |