VN808 datasheet(1/1 Pages) STMICROELECTRONICS | OCTAL HIGH SIDE DRIVER FOR THE AUTOMATION MARKET

1 page

www.st.com/vipower

VN808 internal block diagram

The VN808 has built-in junction over-temperature

protection which is thermally independent for each of

the eight channels, it has a current limitation (1.1A

typical), and a fast demagnetization block clamped at

–52V typical. Thanks to the built-in protection each

channel is self-protected against load short-circuiting

and overloading. The device is able to manage

large inductive loads, however care must be taken

of the power dissipation related to the switching

frequency in free-wheeling conditions. Both under-

voltage protection and loss of ground protection with

shutdown are added. For the very first time a case

over-temperature protection is integrated into the

VIPower switch. The typical RDS(on) of the VN808 is

150m

Ω per channel at 25°C, while the operating voltage

is inside the industrial range of 10.5V to 45V.

VN808 in a typical programmable logic controller application

VN808

BUS

ASIC

CSLK

VCC

Lamps

Valves

Relays

RDS(on)

[

Ω]

IOUT

[A]

0.7

VDSS

[V]

Double integrated thermal protection exists in VN808

in the form of:

Junction temperature detection (TTSD) and

protection, related to the single channel;

Case temperature detection (TCSD) and protection,

related to the whole device dissipation.

The case temperature protection avoids PCB

degradation if a large number of channels are

overloaded. In fact the TCSD acts only on the

overloaded channel; channels that are not overloaded

continue to operate normally.

10.5 to 36

The VN808 is the first octal single chip high-side

driver developed in VIPower M0-3 technology. Both

the control and power stage use N-MOS technology.

VN808 has 8 different channels with single

protection and diagnostic functions integrated on

a single chip. The VN808 has been developed

considering the needs of the industrial process

control market.

High-power capability PowerSO-36;

Vcc/2 compatible inputs;

Junction over-temperature protection;

Case over-temperature protection for thermal

independence of the channel;

Current limitation;

Shorted load protection;

Under-voltage shutdown;

Protection against loss of ground;

Very low stand-by current;

Compliance with 6100-4-4 IEC test up to 4.4kV.

Vcc

GND

OUT

Input 1

Input 2

Input 8

Status

VN808

Undervoltage

VCC-OUT

Clamp

Current lim.

Junction Temp

Detection

Case Temp. Detec.

gic

VCC

[V]

8 x 150

Número de Pieza	Descripción de Componentes	Html View	Fabricante
VND5012AK-E	DOUBLE CHANNEL HIGH SIDE DRIVER WITH ANALOG CURRENT SENSE FOR AUTOMOTIVE APPLICATIONS	1 2 3 4 5 More	STMicroelectronics
VNQ5050K-E	QUAD CHANNEL HIGH SIDE DRIVER FOR AUTOMOTIVE APPLICATIONS	1 2 3 4 5 More	STMicroelectronics
VN5016AJ-E	SINGLE CHANNEL HIGH SIDE DRIVER WITH ANALOG CURRENT SENSE FOR AUTOMOTIVE APPLICATIONS	1 2 3 4 5 More	STMicroelectronics
L9848	OCTAL CONFIGURABLE LOW/HIGH SIDE DRIVER	1 2 3 4 5 More	STMicroelectronics
VND5050J-E	Double channel high side driver with analog current sense for automotive applications	1 2 3 4 5 More	STMicroelectronics
MC33888FB	Quad High Side and Octal Low Side Switch for Automotive	1 2 3 4 5 More	Motorola, Inc
VN5050J-E	Single channel high side driver for automotive applications	1 2 3 4 5 More	STMicroelectronics
VND5050AJ-E	Double channel high side driver with analog current sense for automotive applications	1 2 3 4 5 More	STMicroelectronics
S3C72F5	The S3C72F5 single-chip CMOS microcontroller has been designed for high performance using Samsungs newest 4-bit CPU core SAM47 Samsung Arrangeable M	1 2 3 4 5 More	Samsung semiconductor
MC33198	Automotive High Side TMOS Driver	1 2 3 4 5 More	Motorola, Inc

Número de Pieza relacionado

Enlace URL

Patrocinador de Alldatasheet