A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 email@example.com
Mini-Circuits TSS-53LNB3+ is a low-noise amplifier offering industry-leading performance over its full fre-
quency range from 500 MHz to 5 GHz. It contains internal switching, allowing the user control of the ampli-
fier to handle both high and low signal levels by bypassing the LNA in the presence of large signals. The
TSS-53LNB3+ utilizes E-PHEMT technology to achieve excellent noise figure performance in a unique
cascade configuration enabling the combination of very wide band performance and flat gain. This model
comes in a tiny, 3 x 3mm, 12-lead MCLP package.
Ultra-wideband: 500 MHz – 5 GHz
Ideal for a wide range of receiver applications including military, commercial wireless,
Very flat gain
Ideal for broadband or multi-band applications. Just one, cost-efficient model required
for multiple frequency usage.
Minimal external matching components
15 dB return loss typ.
Minimizes the need for external matching networks, simplifying circuit designs, and
enabling the amplifier to operate over multiple bands in a single application circuit.
Internal bypass switch feature
Unique design handles low to high signal levels with minimal noise distortion.
Built-in DC blocking cap at RF-Out port &
separate pads for RF-Out & Vdd
Simplifies biasing eliminates need for Bias-Tee at output.
Compact size: 3 x 3 x 0.9 mm
Saves space in dense system layouts. Low inductance, repeatable transitions, and