A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 email@example.com
5. Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
1. Measured on Mini-Circuits Characterization test board TB-780+. See Characterization Test Circuit (Fig. 1)
2. Current increases at P1dB
3. (Current at 85°C - Current at -45°C)/130)
Absolute Maximum Ratings4
Operating Temperature (ground lead)
-40°C to 85°C
-65°C to 150°C
Total Power Dissipation
8 dBm (continuous), 19 dBm (5 min max.)
16 dBm (continuous), 29 dBm (5 min max.)
DC Voltage Vdd
DC Voltage Enable
Max. Voltage on pad 8
Electrical Specifications1 at 25°C, Zo=50Ω and Vdd=3V, unless otherwise noted