A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 firstname.lastname@example.org
(3) Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
(4) Die performance measured in industry standard 3x3 mm 12-lead package.
(5) Do not exceed absolute maximum ratings.
Electrical Specifications(1) at 25°C, Zo=50Ω and V=5V, unless otherwise noted
(1) Measured on Mini-Circuits Die Characterization test board. See Characterization Test Circuit (Fig. 1)