Note 8: Average value measured between rising edges computed over at least one video field.

Note 9: Intrinsic timing jitter is measured in accordance with SMPTE RP 184-1996, SMPTE RP 192-1996 and the applicable serial data transmission standard,

344M or 1,485 MHz for SMPTE 292M serial data rates. See Timing Jitter Bandpass section.

Note 10: Intrinsic jitter is defined in accordance with SMPTE RP 184-1996 as: jitter at an equipment output in the absence of input jitter. As applied to this device,

Test Loads

20180304

Timing Jitter Bandpass

20180306

www.national.com

7