IBIS4-6600
Datasheet
Cypress Semiconductor Corporation
3901 North First Street
San Jose, CA 95134
408-943-2600
Contact: info@Fillfactory.com
Document #: 38-05708 Rev.**(Revision 1.3 )
Page 5 of 63
1.2 Key features
6.6 Mpixel resolution: 2210 x 3002 active pixels – progressive scan.
3.5 µm pitch square pixels (based on the high-fill factor active pixel sensor
technology of FillFactory (US patent No. 6,225,670 and others)).
Monochrome or Bayer (RGB) color filters.
Single 2.5V supply; Single master clock.
High pixel rate of 40 MHz using a 40 MHz system clock.
10-bit digital output.
61 dB dynamic range.
High optical dynamic range with double slope integration and Non Destructive
Read out (NDR) modes.
Electronic rolling shutter.
Pixel addressability to support Region-of-Interest windowing and sub
sampling.
On-chip Double Sampling FPN correction.
Digital programmable using a 3-wire Serial-to-Parallel Interface (SPI).
Programmable gain and offset amplifier.
68-pins ceramic LCC package.
1.3 Part number
Part number
Package
Monochrome
/ color die
Glass lid
IBIS4-6600-M-1
CYII4SM6600AA-HBC – Preliminary
84 pins
JLCC *
Monochrome
Monochrome**
IBIS4-6600-M-2
CYII4SM6600AA-QBC – Preliminary
68 pins
LCC
Monochrome
Monochrome
IBIS4-6600-C-1
CYII4SC6600AA-HAC – Preliminary
84 pins
JLCC
Color
Color***
IBIS4-6600-C-2
CYII4SC6600AA-QAC – Preliminary
68 pins
LCC
Color
Color
* JLCC package for use in evaluation kits only.
** D263 is used as monochrome glass lid (see Figure 34 for spectral transmittance).
*** S8612 is used as color glass lid (see Figure 33 for spectral transmittance).
Other packaging combinations are available upon special request.