Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
LMV358IPT Datasheet(PDF) 2 Page - STMicroelectronics |
|
LMV358IPT Datasheet(HTML) 2 Page - STMicroelectronics |
2 / 14 page Absolute maximum ratings and operating conditions LMV321-LMV358-LMV324 2/14 1 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage (1) 1. All voltage values, except differential voltage are with respect to network terminal. 7V Vid Differential input voltage(2) 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1 V, the maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V), an input series resistor must be added to limit input current. ±1 V Vin Input voltage VDD-0.3 to VCC+0.3 V Toper Operating free air temperature range -40 to + 125 °C Tstg Storage temperature -65 to +150 °C Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction to ambient (3) SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 3. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short- circuits on all amplifiers. All values are typical. 250 125 103 120 100 °C/W Rthjc Thermal resistance junction to case(3) SOT23-5 SO-8 SO-14 TSSOP8 TSSOP14 81 40 31 37 32 °C/W ESD HBM: human body model(4) 4. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5 k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 2kV MM: machine model(5) 5. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 200 V CDM: charged device model (6) 6. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. No value specified for CDM on SOT23-5L package. The value is given for SO and TSSOP packages. 1.5 kV Lead temperature (soldering, 10sec) 250 °C Output short-circuit duration see note(7) 7. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 48 mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. |
Número de pieza similar - LMV358IPT |
|
Descripción similar - LMV358IPT |
|
|
Enlace URL |
Política de Privacidad |
ALLDATASHEET.ES |
¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |