Features:

www.lineagepower.com/oem

Lineage Power

Lineage Power

Lineage Power (China)

3000 Skyline Dr.

2841 Dow Avenue

1353 Chenqiao Road, Shanghai Sengpu Industrial Park

Mesquite, TX 75149

Tustin, CA 92780 USA

Shanghai, 201401 China

Phone: (972) 284-2000

Phone: (714) 544-6665

Phone: 021 6710 8910

CAR2512FP Series

2500 Watt +12V Front End Power Supply

rev 100506

KEY MARKET SEGMENTS & APPLICATIONS

SPECIFICATIONS

2500 Watt 12V Front End Power Supply

Input Voltage Range

180-264 VAC, 47-63 Hz, derate for 140-180 VAC Operation

Input Current Maximum

16A @ 180VAC, Full Load (max)

Inrush Current

40A max. cold start (per ETS 300 132-1 and Bellcore specifications)

Input Protection

One fuse (line) - 20A & 250Vac Type 3AB Axial

Power Factor

0.99 typical complies with IEC555, EN60555-2, EN61000-3-2

Efficiency

Up to 91.5% (90% eff. @ 20% load, 91.5% eff @ 30% load, 90.5% eff @ 50%, 88% @ 100% Load), Operating under 12V

output @ 230 VAC (including ORing MOSFETS)

Output Power

2500W at High Line Operation (180-264 VAC)

Output Voltage Range

Output Current

208 Amps @ 12 VDC

Standby Bias Voltage

3.3VSB @ 1A, reference to Vout Return (optional 5VSB)

Voltage Regulation

±2% of Vnom for any combination of line, load and temperature

Ouput Ripple & Noise

±1% (pk-pk) @ 20MHz with 0.1μF ceramic and 10μF electrolytic caps at the output

Transient Response

5% max deviation, recovery time 300μs @ 50% load step and di/dt < 1A/μs

Switching Frequency

400khz typical or optimized for efficiency gains

Hold-Up Time

12ms at full load measured down to 10.8V (with 230Vac). An early warning signal is provided 2ms prior to loss of output

power. Ride thru is 8.3ms typically

Remote On/Off

TTL Compatible input, ON if >3V or open, OFF if <1V”

Current Limit Protection

110-130% of Iout nominal

Short Circuit Protection

Self protected with auto recovery

Over Voltage Protection

Trip level: ≥14.8Vdc ± 1V, Reset condition by recycling the input or applying Remote On/Off

Operating Temperature

-10°C to +70°C

Over Temperature Protection

Non latching; protection active at 110°C internal temperature, restart at 95°C (typical)

EMI

FCC-B & EN55022-B with specified filter or at rack-level, GR-1089-CORE

LED Indicators

Two LED’s, 1st Led (Green = AC OK), 2nd LED (Green = DC OK / Red = Fault)

Analog Status & Control

Voltage Programming (V Prog), Load sharing (I Share), Remote ON/OFF, Current Monitor (I Monitor), Over temperature

(Temp Warning), Fault, PS Present, Module Enable, AC OK, DC OK

Digital Status & Control

Shock & Vibration

Telcordia NEBS GR-63-CORE Level III

Dimensions

14.88” x 4.00” x 1.65” / 378mm x 102mm x 41.9mm

Weight

4.73lbs / 2.15kg

Safety Approvals

IEC/UL/CSA/EN60950-1, CE Mark (LVD), TUV

Options

5VSB Output

FEATURES

BENEFITS

More system space for application circuits and hardware

Load Sharing & Fault Tolerant

Excellent reliability in N+1 operation with AC or DC Input Versions

Automatic Fan Speed Control

Reduces audible noise and increases reliability

High Efficiency under light Loads

Supports Demands for Latest Server Farm Trends