Tyco Electronics Corporation

300 Constitution Drive

Faraday Road

3816 Noborito, Tama-ku

Asia Pacific Headquarters

Menlo Park, CA 94025-1164

Dorcan, Swindon, SN3 5HH

Kawasaki, Kanagawa 214-8533

26 Ang Mo Kio, Industrial Park 2

USA

United Kingdom

Japan

Singapore 569507

Tel: (800) 926-2425 (US & Canada)

Tel: +44 1793 528171

Tel: +81 44 900 5102

Tel: +65 4866 151

Tel: +1 (650) 361-3860 (All other countries)

Users should independently evaluate the suitability of the product for their application.

For more information about this product visit www.tycoelectronics.com

All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes

no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and

Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the

product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing

without notification to the Buyer which do not affect compliance with any applicable specification.

Specification values

Property

Unit

Requirement

Method of test

Material

Dimensions

mm (inches)

See reverse

ASTM D 2671

Longitudinal change

percent

0 to –10

ASTM D 2671

Tensile strength

psi (MPa)

1500 (10.3) minimum

ASTM D 2671

Ultimate elongation

percent

250 minimum

ASTM D 2671

Secant modulus at 2%

psi (MPa)

20,000 (137) minimum

ASTM D 2671

(expanded)*

Heat shock

No dripping, flowing or

ASTM D 2671

(4 hours at 225°C/437°F)

cracking of outer jacket

Dynamic cut through

pounds (kg)

30 (13.6) minimum

ASTM D3032

Volume resistivity

ohm-cm

ASTM D 2671

Flammability

Self-extinguishing

See note below

within 30 seconds

Splice performance

Current leakage

microamps

0.25 maximum

See note below

Room temperature flex test

See note below

Current leakage

microamps

0.25 maximum

Thermal shock

See note below

Current leakage

microamps

0.25 maximum

Low-temperature flexibility

See note below

Dielectric withstand

No breakdown

1 minute at 1000 V

Heat aging

See note below

Current leakage

microamps

0.25 maximum

Fluid immersion

See note below

Current leakage

microamps

0.25 maximum

Swell

percent

50 maximum

Note: Consult Raychem RT-1112 for specific details about test procedures.

*Calculate based on wall thickness of jacket only.

Standard cut lengths

Part number

Standard cut length

Cut length tolerance

ES2000-No. 1

27 mm, 50 mm, 65 mm

± 1.5 mm

1220 mm

± 25.4 mm

ES2000-No. 2

27 mm, 50 mm, 65 mm

± 1.5 mm

1220 mm

± 25.4 mm

ES2000-No. 3

27 mm, 65 mm, 75 mm

± 1.5 mm

1220 mm

± 25.4 mm

ES2000-No. 4

27 mm, 75 mm, 90 mm

± 1.5 mm

1220 mm

± 25.4 mm

Raychem is a trademark of Tyco Electronics Corporation.