Computer

SM-USB-DIG

TMP102EVM

TMP102EVM Hardware Setup

www.ti.com

1.2

Related Documentation from Texas Instruments

The following documents provide information regarding Texas Instruments' integrated circuits used in the

assembly of the TMP102EVM. This user's guide is available from the TI web site under literature number

SBOU114. Any letter appended to the literature number corresponds to the document revision that is

current at the time of the writing of this document. Newer revisions may be available from the TI web site,

or call the Texas Instruments' Literature Response Center at (800) 477-8924 or the Product Information

Center at (972) 644-5580. When ordering, identify the document by both title and literature number.

Table 2. Related Documentation

Document

Literature Number

TMP102 Product Data Sheet

SBOS397B

SM-USB-DIG Platform User Guide

SBOU098

2

TMP102EVM Hardware Setup

Figure 2 shows the overall system setup for the TMP102EVM. The PC runs software that communicates

with the SM-USB-DIG platform. The SM-USB-DIG platform generates the digital signals used to

communicate with the TMP102 test board. The SM-USB-DIG and TMP102EVM are easily connectable

through a 10-pin, board-to-board connector that should be attached to the SM-USB-DIG platform and the

TMP102EVM PCBs. Once these two boards are connected, simply plug the USB device from the

SM-USB-DIG into the computer as shown in Figure 2.

Figure 2. TMP102EVM Hardware Setup

4

TMP102EVM Evaluation Board and Software Tutorial

SBOU114

– August 2011

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated