Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
LM48100QMHE Datasheet(PDF) 7 Page - Texas Instruments |
|
LM48100QMHE Datasheet(HTML) 7 Page - Texas Instruments |
7 / 24 page LM48100Q www.ti.com SNAS470D – OCTOBER 2008 – REVISED MARCH 2013 I 2C Interface Characteristics V DD = 5V, 2.2V ≤ I 2CV DD ≤ 5.5V (1) (2) The following specifications apply for AV = 0dB, RL = 8Ω, f = 1kHz, unless otherwise specified. Limits apply for TA = 25°C. LM48100Q Units Symbol Parameter Conditions Typical Limits (Limits) (3) (4) t1 SCL period 2.5 μs (min) t2 SDA Setup Time 100 ns (min) t3 SDA Stable Time 0 ns (min) t4 Start Condition Time 100 ns (min) t5 Stop Condition Time 100 ns (min) t6 SDA Data Hold Time 100 ns (min) VIH Logic High Input Threshold 0.7 x I2CVDD V (min) VIL Logic Low Input Threshold 0.3 x I2CVDD V (max) (1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. All voltages are measured with respect to the ground pin, unless otherwise specified. (2) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not ensured. (3) Typical values represent most likely parametric norms at TA = +25ºC, and at the Recommended Operation Conditions at the time of product characterization and are not specified. (4) Datasheet min/max specification limits are specified by test or statistical analysis. I 2C Interface Characteristics V DD = 5V, 1.8V ≤ I 2CV DD ≤ 2.2V (1) (2) The following specifications apply for AV = 0dB, RL = 8Ω, f = 1kHz, unless otherwise specified. Limits apply for TA = 25°C. LM48100Q Units Symbol Parameter Conditions Typical Limits (Limits) (3) (4) t1 SCL period 2.5 μs (min) t2 SDA Setup Time 250 ns (min) t3 SDA Stable Time 0 ns (min) t4 Start Condition Time 250 ns (min) t5 Stop Condition Time 250 ns (min) t6 SDA Data Hold Time 250 ns (min) VIH Logic High Input Threshold 0.7 x I2CVDD V (min) VIL Logic Low Input Threshold 0.3 x I2CVDD V (max) (1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. All voltages are measured with respect to the ground pin, unless otherwise specified. (2) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not ensured. (3) Typical values represent most likely parametric norms at TA = +25ºC, and at the Recommended Operation Conditions at the time of product characterization and are not specified. (4) Datasheet min/max specification limits are specified by test or statistical analysis. Copyright © 2008–2013, Texas Instruments Incorporated Submit Documentation Feedback 7 Product Folder Links: LM48100Q |
Número de pieza similar - LM48100QMHE |
|
Descripción similar - LM48100QMHE |
|
|
Enlace URL |
Política de Privacidad |
ALLDATASHEET.ES |
¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |