CAT811, CAT812

http://onsemi.com

9

ORDERING INFORMATION

Order Number

Voltage

Top Mark (Note 4)

Output

Reset

Package

Quantity

per Reel

(Note 5)

NiPdAu

Matte−Tin

NiPdAu

Matte−Tin

CAT811LTBI−GT3

CAT811LTBI−T3

4.63 V

VEA

VES

Manual

Reset

LOW

SOT−143−4

3,000

CAT811MTBI−GT3

CAT811MTBI−T3

4.38 V

VEA

VES

CAT811JTBI−GT3

CAT811JTBI−T3

4.00 V

VEA

VES

CAT811TTBI−GT3

CAT811TTBI−T3

3.08 V

VEA

VES

CAT811STBI−GT3

CAT811STBI−T3

2.93 V

VEA

VES

CAT811RTBI−GT3

CAT811RTBI−T3

2.63 V

VEA

VES

CAT811ZTBI−GT3

CAT811ZTBI−T3

2.32 V

VEA

VES

CAT812LTBI−GT3

CAT812LTBI−T3

4.63 V

VTA

VTS

Manual

Reset

HIGH

SOT−143−4

3,000

CAT812MTBI−GT3

CAT812MTBI−T3

4.38 V

VTA

VTS

CAT812JTBI−GT3

CAT812JTBI−T3

4.00 V

VTA

VTS

CAT812TTBI−GT3

CAT812TTBI−T3

3.08 V

VTA

VTS

CAT812STBI−GT3

CAT812STBI−T3

2.93 V

VTA

VTS

CAT812RTBI−GT3

CAT812RTBI−T3

2.63 V

VTA

VTS

CAT812ZTBI−GT3

CAT812ZTBI−T3

2.32 V

VTA

VTS

4. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents.

5. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

6. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device

Nomenclature document, TND310/D, available at www.onsemi.com

ON Semiconductor and

are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

CAT811/D

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative