Series AMLBW-Z

Up to 700mA | Step Up LED Driver

www.aimtec.com

Tel: +1 514 620 2722

Toll free: + 1 888 9 AIMTEC

(924 6832)

F 051e R12.B

2 of 8

North America only

General Specifications

Parameters

Conditions

Typical

Maximum

Units

Operating frequency

Depending on the model

360-380

KHz

Operating temperature

AMLBW-3615Z

-40 to +85

AMLBW-3625Z; AMLBW-3630Z

-40 to +80 (Vin 9-18V) / -40 to +85 (Vin 18-36V)

AMLBW-3635Z

-40 to +75 (Vin 9-18V) / -40 to +85 (Vin 18-36V)

AMLBW-3650Z

-40 to +70 (Vin 9-18V) / -40 to +80 (Vin 18-36V)

AMLBW-3660Z; AMLBW-3670Z

-40 to +70 (Vin 9-18V) / -40 to +75 (Vin 18-36V)

Storage temperature

-55 to +125

Maximum case temperature

100

Thermal Impedance

Depending on the model

+13.7 to +17

Cooling

Free air convection

Humidity

95

% RH

Case material

Non-Conductive Black Plastic (UL94-V0 rated)

Weight

38

g

2.03 x 1.03 x 0.62 inches

51.50 x 26.10 x 15.80 mm

MTBF

Maximum Soldering Temperature

1.5mm from case for 10sec.

260

NOTES:

1. To prevent burning out the driver, the output voltage must be 5.0VDC higher than the input voltage

2. Do NOT exceed the maximum power ratings on each model

under cool start conditions

4. This series offers protection in case the output is shorted. After the short occurs, thDe input current will be cut off and recovers when the short is removed

5. The reference value of under voltage protection (7.6V) means that under the condition of cool start and full discharge of output, the protection starts when

input voltage is lower than 7.6V

6. Note: PWM dimming means PWM signals are converted into mimic analog voltage by internal circuits and then do the dimming. The advantage of this

approach is to reduce the EMI

Safety Specifications

Parameters

Standards

EMI: Designed to meet EN 55022 Class B

Safety : Designed to meet IEC/EN 60950-1 , UL8750, IEC/EN 61347-2-13

Pin Out Specifications

Pin

Single

1(Red)

+Vi

+ DC Supply

2(White)

DIM

PWM/Analog Dimming Control

3(Blue)

EN

Remote ON/OFF

4(Black)

-Vi

-DC Supply

5(Yellow)

+LED

LED Anode connection

6(Black)

-LED

LED Cathode connection