ADC08L060

SNAS167G – MAY 2002 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2)

3.8V

Voltage on Any Input or Output Pin

CLK, PD Voltage Range

±25 mA

±50 mA

Human Body Model

2500V

Machine Model

200V

Soldering Temperature, Infrared,

235°C

Storage Temperature

−65°C to +150°C

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including inoperability and degradation of

device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or

other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The recommended Operating

Conditions indicate conditions at which the device is functional and the device should not be operated beyond such condition.

(2)

All voltages are measured with respect to GND = AGND = DR GND = 0V, unless otherwise specified.

(3)

current at that pin should be limited to 25 mA. The 50 mA maximum package input current rating limits the number of pins that can

safely exceed the power supplies with an input current of 25 mA to two.

(4)

fault condition (e.g., when input or output pins are driven beyond the power supply voltages, or the power supply polarity is reversed).

Obviously, such conditions should always be avoided.

(5)

See AN-450, “Surface Mounting Methods and Their Effect on Product Reliability” (SNOA742).

Operating Ratings

(1) (2)

Operating Temperature Range

+2.4V to +3.6V

Ground Difference |GND

− DR GND|

0V to 300 mV

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including inoperability and degradation of

device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or

other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The recommended Operating

Conditions indicate conditions at which the device is functional and the device should not be operated beyond such condition

(2)

All voltages are measured with respect to GND = AGND = DR GND = 0V, unless otherwise specified.

Package Thermal Resistance

Package

24-Lead TSSOP

92°C/W

4

Submit Documentation Feedback

Copyright © 2002–2013, Texas Instruments Incorporated

Product Folder Links: ADC08L060