www.ti.com

ABSOLUTE MAXIMUM RATINGS

PACKAGE DISSIPATION RATING

TPS72101

,, TPS72115

TPS72116, TPS72118

SLVS352C – DECEMBER 2001 – REVISED MARCH 2006

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ORDERING INFORMATION

VOLTAGE

PACKAGE

PART NUMBER

SYMBOL

Adjustable

PEKI

1.5 V

PEII

SOT-23

-40°C to 125°C

(DBV)

1.6 V

PHFI

1.8 V

PEJI

(1)

The DBVT indicates tape and reel of 250 parts.

(2)

The DBVR indicates tape and reel of 3000 parts.

TPS72101, TPS72115,

TPS72116, TPS72118

Voltage range at IN

-0.3 V to 7 V

Voltage range at EN

-0.3 V to 7 V

Voltage on OUT, FB, NC

Peak output current

Internally limited

ESD rating, HBM

3 kV

Continuous total power dissipation

See Dissipation Rating Table

-40°C to 150°C

-65°C to 150°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.All voltage

values are with respect to network ground terminal.

(2)

All voltage values are with respect to network ground terminal.

DERATING FACTOR

BOARD

PACKAGE

POWER RATING

POWER RATING

POWER RATING

DBV

65.8 °C/W

259 °C/W

3.9 mW/°C

386 mW

212 mW

154 mW

DBV

65.8 °C/W

180 °C/W

5.6 mW/°C

555 mW

305 mW

222 mW

(1)

The JEDEC Low-K (1s) board design used to derive this data was a 3 inch x 3 inch, two-layer board with 2 ounce copper traces on top

of the board.

(2)

The JEDEC High-K (2s2p) board design used to derive this data was a 3 inch x 3 inch, multilayer board with 1 ounce internal power and

ground planes and 2 ounce copper traces on top and bottom of the board.

2

Submit Documentation Feedback