Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
TPS3851H18EDRBR Datasheet(PDF) 4 Page - Texas Instruments |
|
|
TPS3851H18EDRBR Datasheet(HTML) 4 Page - Texas Instruments |
4 / 31 page 4 TPS3851 SBVS300 – NOVEMBER 2016 www.ti.com Product Folder Links: TPS3851 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The absolute maximum rating is VDD + 0.3 V or 7.0 V, whichever is smaller. (3) Assume that TJ = TA as a result of the low dissipated power in this device. 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) MIN MAX UNIT Supply voltage range VDD –0.3 7 V Output voltage range RESET, WDO –0.3 7 V Voltage ranges SET1, WDI, MR –0.3 7 V CWD –0.3 VDD + 0.3 (2) Output pin current RESET, WDO ±20 mA Input current (all pins) ±20 mA Continuous total power dissipation See Thermal Information Temperature Operating junction, TJ (3) –40 150 °C Operating free-air, TA (3) –40 150 Storage, Tstg –65 150 (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with less than 500-V HBM is possible with the necessary precautions. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with less than 250-V CDM is possible with the necessary precautions. 6.2 ESD Ratings VALUE UNIT V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±1000 V Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±500 (1) Using standard timing with a CCWD capacitor of 0.1 nF or 1000 nF gives a tWD(typ) of 0.704 ms or 3.23 seconds, respectively. (2) Using extended timing with a CCWD capacitor of 0.1 nF or 1000 nF gives a tWD(typ) of 62.74 ms or 77.45 seconds, respectively. 6.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) MIN TYP MAX UNIT VDD Supply pin voltage 1.6 6.5 V VSET1 SET1 pin voltage 0 6.5 V CCWD Watchdog timing capacitor 0.1(1)(2) 1000(1)(2) nF CWD Pullup resistor to VDD 9 10 11 kΩ RPU Pullup resistor, RESET and WDO 1 10 100 kΩ IRESET RESET pin current 10 mA IWDO Watchdog output current 10 mA TJ Junction temperature –40 125 °C |
Número de pieza similar - TPS3851H18EDRBR |
|
Descripción similar - TPS3851H18EDRBR |
|
|
Enlace URL |
Política de Privacidad |
ALLDATASHEET.ES |
¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |