GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

9021-60466 Rev. D page 2 of 4

www.gamewell-fci.com

Features (Continued)

•

History Log with 256 event storage.

•

Piezo sounder for alarm, trouble and supervisory.

•

24 volt DC operation.

•

Low AC voltage sense.

•

Outputs Programmable for the following:

- Releasing circuits or NACs

•

NACs programmable for the following:

- Silence Inhibit

- Auto-Silence

- Strobe Synchronization

- Selective Silence (horn-strobe mute)

- Temporal or Steady Signal

- Silenceable or Non-silenceable

- Release Stage Sounder

•

Disable/Enable control per input zone and output zone.

•

Extensive transient protection.

•

Automatic battery charger with charger supervision.

•

Optional Dress Panel DP-51050 (red).

•

Optional Trim Ring TR-CE (red) for semi-flush

mounting the cabinet.

•

Optional CAC-5X Class A Converter Module for

Outputs and IDCs.

•

Optional 4XTMF Municipal Box Transmitter Module.

•

Optional Digital Alarm Communicators

(411, 411UD,

411UDAC).

Programming and Software

The programming software offers the following features:

•

Custom English labels (per point) may be manually

entered or selected from an internal library file.

•

Three programmable Form-C relay outputs.

•

Pre-programmed and custom application templates.

•

Continuous fire protection during online programming

at the front panel.

•

Program Check automatically catches common errors

not linked to any zone or input point.

User Interface

The user interface features are listed below:

•

Integral 80-character LCD display with backlighting.

•

Real-time clock/calendar with automatic daylight

savings adjustments.

•

ANN-Bus for connection to remote annunciators.

•

Audible or silent walk test capabilities.

•

Piezo sounder for alarm, trouble, and supervisory.

Controls and Indicators

The panel provides the following LED Indicators:

•

Fire Alarm (red)

•

AC Power (green)

•

Supervisory (yellow)

•

Alarm Silenced (yellow)

•

Trouble (yellow)

•

Discharge (red)

Control Buttons

•

Acknowledge

• System Reset (lamp test)

•

Alarm Silence

•

Drill

Features (Continued)

AC Power – TB1

The AC Power -TB1 for each panel is listed below:

•

GF506D:

120 VAC, 50/60 Hz, 2.3

amps

•

insulation.

•

Supervised, non power-limited

Battery (sealed lead acid only) – J12:

The Battery (for sealed lead acid only) - J12 specifications

are listed below.

•

Maximum Charging Circuit - Normal Flat Charge:

- 27.6 VDC @ 1.4 amp. Supervised, non power-limited.

•

Maximum Charger Capacity:

- 26 Amp Hour battery (two 18 Amp Hour batteries can

be housed in the FACP cabinet. Larger batteries

require separate battery box such as the BB-26 or

BB-55).

•

Minimum Battery Size:

7 Amp Hour

Initiating Device Circuits - TB4 and TB6

The Initiating Device Circuits for TB4 and TB6

specifications are listed below.

•

Alarm Zones 1 - 5 on TB4

•

Alarm Zone 6 on TB6

•

Supervised and power-limited circuitry

•

Style B (Class B) wiring with Style D (Class A) option

•

Normal Operating

Voltage:

Nominal 20 VDC

•

Alarm Current:

15 mA minimum

•

Short Circuit Current:

40 mA max

•

Maximum Loop

Resistance:

100 Ohms

•

End-of-Line Resistor:

4.7KOhms, 1/2 watt

(PN 71252)

•

Standby Current:

4 mA

For a list of compatible devices, refer to the Gamewell-FCI

Device Compatibility Document, P/N: 52195.

Notification Appliance and Releasing Circuit(s) -

TB5 and TB7

The notification appliance and releasing circuits for TB5

and TB7 specifications are listed below.

•

Four Output Circuits.

•

Style Y (Class B) or Style Z (Class A) with optional

converter module

•

Strobe synchronization

•

Special Application power

•

Supervised and power-limited circuitry

•

Normal Operating

Voltage:

Nominal 24 VDC

•

Maximum Signaling

Current:

7.0 amps (3.0 amps

maximum per NAC)

•

End-of-Line Resistor:

4.7KOhms, 1/2 watt

(PN71252)

•

Max. Wiring Voltage

Drop:

2 VDC

For a list of compatible devices, refer to the Gamewell-FCI

Device Compatibility Document, P/N: 52195.