Si5345-EVB

10

Rev. 1.1

10.4. Common ClockBuilderPro Work Flow Scenarios

There are three common workflow scenarios when using CBPro and the Si5345 EVB. These workflow scenarios

are:



Workflow Scenario #1: Testing a Silicon Labs-Created Default Configuration



Workflow Scenario #2: Modifying the Default Silicon Labs-Created Device Configuration



Workflow Scenario #3: Testing a User-Created Device Configuration

Each is described in more detail in the following sections.

10.5. Workflow Scenario #1: Testing a Silicon Labs-Created Default Configuration

The flow for using the EVB GUI to initialize and control a device on the EVB is as follows.

Once the PC and EVB are connected, launch ClockBuilder Pro by clicking on this icon on your PC’s desktop.

Figure 11. ClockBuilderPro Desktop Icon

If an EVB is detected, click on the “Open Default Plan” button on the Wizard’s main menu. CBPro automatically

detects the EVB and device type.

Figure 12. Open Default Plan

Once you open the default plan (based on your EVB model number), a popup will appear.

Figure 13. Write Design to EVB Dialog